Inverter Cabinet VFD Frequency Inverter AC Drives 15kw Motor

Inverter Cabinet VFD Frequency Inverter AC Drives 15kw Motor

 1.Organization profile

2 Solution description

3 Introduction of numerous areas of the converter
The composition types of JAC300 sequence converter are the plastic and metallic. The exterior diagram is shown under.

4 Basic technological specification 
 

Class Terminal image Terminal title Perform description
Electricity source +10V-GND Exterior relationship of +10V energy supply Supply electricity provide of +10V externally, with optimize output existing: 10mA
It is usually utilized as doing work electrical power provide for external potentiometer and the resistance variety of potentiometer is 1kΩ~5k Ω
+24V-COM External link of +24V energy provide +24V power supply is provided outwards and typically utilised as the operating electrical power source for digital input/output terminal and the power source for exterior sensor
Highest output recent: 200mA
OP Input terminal of external electricity offer The manufacturing facility default is relationship to+24V
When an exterior signal is used to travel DI1~DI7, OP shall be related to exterior power source and disconnected from+24V electricity provide terminal
Analog enter AI1-GND Analog Enter Terminal one one. Input voltage selection: DC 0V~10V
two. Enter resistance: 22kΩ
AI2-GND Analog Enter Terminal two 1. Input assortment: DC 0V~10V/4mA~20mA, as established by Jumper J8 on the management panel
2. Input resistance: 22kΩ for voltage input and 500Ω for recent enter.
Electronic input DI1- OP Digital
Input 1
1. Optical coupler isolation, with bipolar input
two. Enter resistance: 2.4kΩ
three. Voltage selection in input degree: 9V~30V
DI2- OP Digital
Input 2
DI3- OP Electronic
Input three
DI4- OP Digital
 Input four
DI6- OP Electronic
 Input six
DI7- OP Electronic
Enter seven
DI5- OP Large-pace pulse enter terminal Aside from the attributes of DI1~DI7, it could be utilized as higher-speed pulse input channel.
Highest enter frequency: 100kHz
Analog output AO1-GND Analog
Output one
Jumper J5 on the manage panel shall decide voltage or existing output.
Output voltage assortment: 0V~10V
Output current selection: 0mA~20mA
Analog output AO2-GND Analog
Output one
Analog
Output 2
Jumper J3 on the manage panel shall establish voltage or present output.
Output voltage selection: 0V~10V
Output present assortment: 0mA~20mA
Electronic output DO-COM Digital
 Output one
Optical coupler isolation, bipolar open up collector output
Output voltage selection: 0V~24V
Output recent assortment: 0mA~50mA
 
Relay output RO1A-RO1B Shut terminal Make contact with drive capacity:
25V ac,3A,COSØ=.four .
30Vdc ,1A
RO1A-RO1C Open terminal
RO2A-RO2C Open terminal
Secondary interface RO2A-RO2B Closed terminal Make contact with push capacity:
25V ac,3A,COSØ=.4 .
30Vdc ,1A
Communication interface 485+,485- Modbus Modbus communication interface, non-isolated output

Product Specification
Basic functions Maximum frequency Vector management:~500Hz V/F manage:~500Hz
Provider frequency .8kHz~12kHz Computerized adjustment of provider frequency based mostly on load attributes
Enter frequency resolution Digital placing:.01Hz Analog location:Maximum frequency×0.571%
control approach Open loop vector handle(SVC)
V/F  control 
CZPTting torque G kind machine:.5Hz/150%(SVC)    
P sort device: .5Hz/a hundred%
 Speed variety 1:100  (SVC)
Constant-speed accuracy ±0.5%(SVC)
Overload capacity G type machine:60s for 150% of the rated current
P sort machine:60s for 120% of the rated current
Torque boost Automatic torque boost                       
Guide torque boost0.one%~thirty.%
 
V/F curve 3 methods: straight V/F curve multi-point V/F curve N-th electricity variety V/F curve (one.2th electrical power, one.4th energy, one.sixth electrical power, one.eighth energy, 2th electrical power)
V/F Separation 2 ways: full separation, semi-separation
Acceleration /
deceleration curve
 
Straight-line or S-curve acceleration and deceleration                             
Four groups of acceleration/deceleration time with the 
range of 0.-6500.0s
 
DC braking
Built-in brake unit
DC braking frequency:.00Hz~ Maximum frequency
Braking time:.0s~36.0s Brake motion present value:.%~100.%
Jog manage Jog frequency variety:.00Hz~50.00Hz.
Jog acceleration/deceleration time0.0s~6500.0s.
Procedure Command supply The operation panel is given, the handle terminal is offered, and the serial conversation port is presented.
Can be switched in a assortment of approaches
Frequency source Multiple frequency resources: electronic reference, analog voltage reference, analog recent reference, serial port reference. It can be switched in a selection of techniques.
Auxiliary frequency supply 10 auxiliary frequency sources. Versatile implementation of auxiliary frequency trimming and frequency synthesis
Enter terminal common:
7 digital input terminals (customizable large-speed pulse enter, support 100K)
two analog input terminals, 1 only supports ~10V voltage enter, one supports ~10V voltage input or 4~20mA present enter
Output terminal CZPT: 1 digital output terminal
one relay output terminal
two analog output terminals, assist ~20mA recent output or ~10V voltage output
Enlargement potential:
one relay output terminal
Display and
 keyboard operation
 
LED display Display the parameter
Key lock and 
function selection
 
Realize partial or all key lock and define the 
action range of some keys to prevent misoperation
 
Protection function Short circuit test of electrified motor, 
enter/output default phase protection, 
overcurrent protection, 
overvoltage protection, 
undervoltage protection, 
overheat protection, 
overload protection, etc.
 

 

Inverter Cabinet VFD Frequency Inverter AC Drives 15kw Motor