Z4 Series 60kw Medium DC Motor

Z4 Series 60kw Medium DC Motor

Solution Description:
 
DC motor is a rotating motor that can convert DC electric powered energy into mechanical power (DC motor) or mechanical energy into DC electrical strength (DC generator). It is a motor that can change DC and mechanical strength into one particular one more. When it operates as a motor, it is a immediate present motor, which converts electrical power into mechanical power when it runs as a generator, it is a direct present generator, which converts mechanical power into electrical vitality.
 

Item Identify Z4 Sequence 60kw Medium DC Motor
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition structure The structure of DC motor should consist of two elements: stator and rotor. The static component of DC motor is named stator. The principal purpose of stator is to create magnetic subject, which is composed of foundation, principal magnetic pole, commutation pole, finish cap, bearing and brush system. Working component is referred to as rotor, whose principal perform is to produce electromagnetic torque and inductive electromotive power. It is the hub of strength conversion of DC motor. So it is also typically called armature, which is composed of rotor, armature core, armature winding, commutator and admirer.
Model Z Kind
Seat amount Z315-Z1000
electrical power sixty~2800kW
Voltage 220~1000V
Torque range 1.5 ~180kNm
Security degree IP23, IP44
Cooling method IC06,IC17,IC37,IC81W
Operating pace  Constant Speed /Minimal Velocity /Adjust Velocity /Higher Speed Other 
Main classification DC Motor is a machine that converts mechanical vitality into DC electrical power. It is primarily used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy source of alternator. Despite the fact that in spots exactly where DC energy is needed, AC energy rectifier is also utilised to change AC into DC power, but from some elements of efficiency, AC rectifier power source can not fully replace DC generator.  
Software DC motors are widely used in tape recorders, video clip recorders, video discs, electric shavers, hair dryers, digital watches, toys and so on.
Routine maintenance method Professional motor routine maintenance centre motor maintenance procedure: cleansing stator and rotor – changing carbon brush or other components – vacuum F force dipping paint – drying – Calibration stability.
1. Use surroundings must be constantly dry, motor surface area need to be retained cleanse, air ingestion must not be hindered by dust, fibers and other road blocks.
two. When the thermal protection of the motor carries on to function, it should be ascertained whether the fault will come from the motor or the overload or the environment worth of the protective device is also low. Right after eliminating the fault, it can be put into operation.
3, ensure that the motor is effectively lubricated throughout operation. The common motor operates for about 5000 several hours, that is to say, lubricating grease must be extra or replaced. When bearing overheating or lubricating deterioration is found in procedure, the hydraulic force must change lubricating grease in time. When replacing grease, the previous grease must be taken out, and the oil groove of bearing and bearing cover should be washed with gasoline. Then ZL-three lithium grease should be stuffed with 1/2 (two poles) and 2/3 (four poles, six poles and eight poles) of the cavity in between the inner and outer rings of the bearing.
four. When the life of the bearing is more than, the vibration and noise of the motor will enhance obviously. When the radial clearance of the bearing reaches the following benefit, the bearing ought to be replaced.
five, when taking away the motor, it is Alright to remove the rotor from the shaft extension or the non extension finish. If it is not essential to unload the supporter, it is far more convenient to just take out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from getting destroyed.
6. When changing the windings, the form, dimensions, turns and gauges of the original windings should be recorded. When these data are misplaced, they should be acquired from the company and the first designed windings must be changed at will, which typically deteriorates one particular or several overall performance of the motor or even can make it extremely hard to use them.

 

 

Z4 Series 60kw Medium DC Motor